Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Chesapeake, VA
Gate installation in Chesapeake means building for water, not just for looks. Our technicians have up to 10 years of experience, and they size posts and operators around soil that moves after heavy rain, tidal creeks that back up in Deep Creek and Great Bridge, and humid summers that work on wood and steel all year. Whether you need a driveway gate for a Greenbrier lot or a wide field entrance off a rural road, we work on your brand, set the price in writing before anything starts, and keep the job gate-only. Call (855) 360-8054 for a free estimate.
Why Chesapeake Homes Are Different
Most gate problems in Chesapeake start at the ground, not at the latch. The city’s low-lying lots back onto tidal creeks and drainage ditches in neighborhoods like Great Bridge and Deep Creek, so soil settling and flood-related ground movement push posts out of line and throw gates into drag long before a hinge or a motor gives out. That’s a problem inland gate crews rarely see, and it changes the order of the work: we check the soil line and footing depth before we touch the hardware.
The housing stock matters too. Greenbrier and Great Bridge run mostly to 1980s to 2000s brick-and-vinyl suburban homes with gates sized for a standard driveway. Deep Creek’s older rural and waterfront properties often carry custom-built wood, chain-link, or welded metal gates spanning wide driveways and field entrances, which means heavier panels, longer spans, and more stress on every post. Then the climate adds its own wear. Chesapeake’s humid subtropical summers bring heavy downpours and nor’easters, and hurricane-season flooding in low spots speeds up rust, rots wood, and leaves gates misaligned once the water drops.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Chesapeake Services
These are the two jobs Chesapeake property owners call about most, and both start with a technician who can read the whole system rather than just the symptom.
Gate Repair in Chesapeake
Manual gate work in Chesapeake is mostly a structural job. Sagging panels, dragging gates, hinges that have pulled out of saturated ground, and storm-struck wood or welded frames are the everyday calls, and in Great Bridge and Deep Creek the first thing to check is the footing, not the hinge. A gate that drags after rain is usually telling you the post has heaved. We repair the gate and the ground under it. For the full scope of mechanical work, see Gate Repair in Chesapeake.
Electric Gate Repair in Chesapeake
When a gate stops moving but the panel is undamaged, the fault is usually in the operator, the control board, or the wiring rather than the gate itself. Our technicians diagnose Viking, DoorKing, and Ghost Controls systems among others, checking limits, safety edges, and power delivery before suggesting any replacement. Salt air and storm flooding in low-lying Chesapeake yards shorten the life of control boards and exposed connections, so we trace the whole circuit. For automated systems, see Electric Gate Repair in Chesapeake.
Gate Installation in Chesapeake
Gate installation in Chesapeake is a ground-first job. Our technicians have up to 10 years of experience setting gates on lots where the soil stays wet, and they choose post depth, footing, and operator type around that reality rather than the other way around. In the older Deep Creek and Great Bridge properties, a gate that sits on ground which stays saturated after rain needs deeper footings and better drainage than a standard kit allows, and that decision happens before a single panel goes up. From design through the finished operator, this is Gate Installation done as a single, scheduled project with a written price agreed before work begins.
Driveway Gate Installation
Signs you need it
A cracked or rusting driveway gate, an entrance that was never gated, or a span that has outgrown its posts all point to a fresh install rather than a repair.
What it costs in Chesapeake
Most driveway gate installations in Chesapeake land in the $3,200 to $7,500 range depending on span, material, and whether an operator is included, and the written estimate sets the final figure.
How we do it
We measure the opening and check the ground, set posts to proper footing depth, hang the gate and hardware, then wire and commission the operator if there is one.
Electric Gate Installation
Signs you need it
You’re tired of getting out to open the gate, or the existing operator has failed often enough that a new automated system makes more sense than another repair.
What it costs in Chesapeake
Electric gate installation in Chesapeake typically runs $2,800 to $8,500, with the operator, power run, and safety edges driving the spread; the written estimate fixes the price.
How we do it
We match the operator to the gate’s weight and span, run and protect the power, fit safety edges, set the limits, and test the full cycle before we hand it over.
What Gate Installation Costs in Chesapeake
| Item | Typical range in Chesapeake |
|---|---|
| Driveway gate installation | $3,200 – $7,500 |
| Electric gate installation with operator | $2,800 – $8,500 |
| Operator, power run, and safety edges (typical line) | $800 – $2,500 |
Do I need a permit to install a gate in Chesapeake?
Often yes, especially for a taller gate or one tied to fencing near a property line or waterway. Ask the city’s building department before we start, and we’ll build the plan around what they require.
Will a new gate survive flooding on my lot?
It can. We set footings deeper and check drainage where the ground stays wet after storms, and we choose operators rated for damp conditions so a flooded yard doesn’t shorten the system’s life.
Brands We Service in Chesapeake
Our technicians work on your brand rather than steering you toward a replacement, and they know Viking, Ghost Controls, DoorKing, and Elite systems alongside the rest of the major names. No operator parts sit on a shelf here, so turnaround depends on diagnosis and the part. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Chesapeake, VA
| Service | Typical range in Chesapeake |
|---|---|
| Driveway gate installation | $3,200 – $7,500 |
| Electric gate installation with operator | $2,800 – $8,500 |
| Operator, power run, and safety edges (typical line) | $800 – $2,500 |
| Gate repair, manual | $150 – $500 |
| Electric gate repair | $200 – $850 |
In Chesapeake, what pushes a gate job up is the ground: deeper footings, drainage work, and heavier custom panels on wide Deep Creek driveways all add labor. Every price we give is quoted and agreed before any work starts, so the invoice matches the estimate.
Neighborhoods We Serve in Chesapeake
We cover the whole city, from the suburban lots in Greenbrier to the waterfront and rural properties in Deep Creek, and both kinds of job get the same ground inspection before anything is ordered or hung. Our technicians know that a Great Bridge driveway gate and a Deep Creek field gate present different footing problems, and the written estimate reflects which one you’re dealing with. For a free on-site estimate and a clear price, call (855) 360-8054. Fast dispatch from 7am to 7pm, Sunday through Friday.
- Greenbrier
- Great Bridge
- Deep Creek
- Western Branch (23321)
Service Area – Cities Near Chesapeake
Chesapeake sits in the middle of our core area, and we cover the surrounding towns with the same ground-first approach. If you’re just outside the city line, we can still help: our service area includes Suffolk, VA, Carrsville, VA, Ivor, VA, and Camptown, VA. If your property sits on saturated ground or a wide rural entrance, tell us on the call so we can plan the site visit and the footing approach before we arrive.
Serving Chesapeake, VA – Our Local Coverage Area
We serve Chesapeake and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Chesapeake
We answer 24/7 and dispatch fast from 7am to 7pm, Sunday through Friday, across Chesapeake. Book the visit and we’ll confirm a time window. Call (855) 360-8054. Estimates are free.
We don’t file permits for you, but we build to the plan the city’s building department approves and we’re glad to work around HOA style rules. Confirm both before a new gate is ordered.
The full city, including Greenbrier, Great Bridge, Deep Creek, and the Western Branch area. If you’re right at the city line, call and we’ll confirm coverage and a time window for your estimate.
Call (855) 360-8054 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 10 years of experience, and every Chesapeake price is agreed in writing before any work starts.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30-60 min.
- 4You approve before work beginsNothing starts until you say go.
What Chesapeake Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Paige Bennett"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Eric Ackerman"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Roger Sutton